WiFi Camp Pro 2
Wifi Repeater Kit – Free Shipping
WiFi that travels with you
The WiFi CampPro will connect to an existing WiFi network and create a new indoor network, allowing multiple devices to connect to the newly created WiFi network.
The CampPro products are presented in a ready-to-use kit including an outdoor antenna and modem (Tube), connected via a 5m USB cable to the indoor WiIF router (R36A).
Ideal for all applications where a WiFi repeater is required, such as motorhomes in a camping site, sailboat in a marina, outdoor building on a large block of land or connecting two distant buildings or sites using a simple and single WiFi network.
The outdoor Tube is a high power and ultra-sensitive device and can connect to a weak remote WiFi network in instances where typical devices such as your phone or laptop is not able to even identify the remote network.
An optional antenna upgrade will further improve the performance of the WiFi CampPro
Antenna Upgrade Options
DIRECTIONAL WIFI ANTENNA UPGRADE
Alfa AWUS036NH + Alfa 7dBi gain RP-SMA directional panel antenna APA-M04
OMNI-DIRECTIONAL WIFI ANTENNA UPGRADE
Alfa AWUS036NH + Alfa Network ARS-N19M Alfa 9dBi WiFi Booster SMA Omni-Directional Antenna With magnetic base
Included in the box:
- Alfa R36A USB router
- 5 dBi RP-SMA antenna (for R36 signal transmit)
- Tube-U(N) USB receiver + 8m (26 ft) USB cable
- AOA-2409TF 9 dBi omni antenna (for receiving signal)
- 12V power supply for R36
- Tube-U(N) needs no power supply, draws power from the R36 via USB cable
- Waterproof tape and wire ties for mounting Tube to pole
- R36 car/vehicle power supply adapter
How it works
Use all three of these components above together to boost and share a Wi-Fi signal. Simply connect your computer to the R36A via ethernet cable for a one-time configuration and setup. Connect the AOA-2409TF antenna to the Tube-U(N) receiver and then connect the Tube-U(N) to the USB port on the R36A. Use the Wi-Fi scanning software built-into the R36A that you will see during the setup wizard, so you can scan for and connect to available wireless networks in your area. Once the R36A has connected to a network, you will be prompted to name and password protect your own new local Wi-Fi network, offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.
There is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network, such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use, the Camp Pro may not work well there.