Alfa 4G to Wifi Booster


Or $73.80 today and more time to pay with

The ALFA 4G CampPro2+ Beyond is a cellular modem that transmits into a local WiFi hotspot. The unit will accept and operate on any Australian cellular network, will even turn the weakest signal to a useful internet connection. Now comes with the AOA-M4G Marine external antenna for even better performance!

SKU: 4G CampPro2+Beyond Categories: , Tags: ,


A 4G to Wifi Converter – The ALFA 4G CampPro2+ Beyond is a cellular modem that transmits into a local WiFi hotspot. The unit will accept and operate on any Australian cellular network, will even turn the weakest signal to a useful internet connection. This new version of the kit comes with the ever popular AOA-M4G Marine antenna for even better reception of weak 4G signals at no extra cost!

The new generation of Alfa Network 4G CampPro

This is a special kit shipping in one retail box that features all of the equipment as shown on the product image designed to pick up a weak 4G signal and repeat it as your own personal hotspot. This is ideal for use during camping or in boats, RVs and campers..

  • The best affordable solution for turning 4G to a Wifi Internet Hotspot
  • User Friendly – Mobile friendly web page supports QR code scanning for easy setup so you can enjoy Internet access in minutes
  • Vehicle Surge Protection – Special design to prevent accidental damage from vehicle spikes during ignition

Included in the box:

– Alfa R36A USB router
– Outdoor Antenna AOA-M4G 
– Indoor Antenna ARS -N05 can be upgraded to APA-M04  or ARS-N19M
– Tube-4G USB receiver + 8m (26 ft) USB cable
– 12V power supply for R36
– Tube-4G needs no power supply, draws power from the R36 via USB cable
– waterproof tape and wire ties for mounting Tube to pole
– R36 car/vehicle power supply adapter

How it works

4G to Wifi Converter Kit – Use all three of these components above together to boost and convert a 4G signal to a Wi-Fi signal. Simply connect your computer to the R36A via ethernet cable for a one-time configuration and setup. Put a SIM-card to the Tube-4G (make sure the SIM-card is on a 4G plan or recharged). Connect the AOA-M4G antenna to the Tube-4G receiver and then connect the Tube-4G to the USB port on the R36A. Use the Wi-Fi scanning software built-into the R36A that you will see during the setup wizard, so you can scan for and connect to the new wireless networks in your area. Once the R36A has connected to a network, you will be prompted to name and password protect your own new local Wi-Fi network, offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.


There is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network, such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use, the Camp Pro may not work well there.

4G CampPro 2-AU Supported Bands
LTE FDD B1 / B2 / B3 / B4 / B5 / B7 / B8 / B28
WCDMA B1 / B2 / B5 / B8
GSM B2 / B3 / B5 / B8


Tube-U4G v2 Specification (Outdoor Cellular Modem)
Data LTE FDD: Max 150Mbps (DL) / Max 50Mbps (UL)
LTE TDD: Max 130Mbps (DL) / Max 35Mbps (UL)
DC-HSDPA: Max 42Mbps (DL)
HSUPA: Max 5.76Mbps (UL)
WCDMA: Max 384Kbps(DL) / Max 384Mbps(UL)
EDGE: Max 296Kbps(DL) / Max 236.8Kbps(UL)
GPRS: Max 107Kbps(DL) / Max 85.6Kbps(UL)
Antenna Connector N-Type (Male)
Interface Mini-USB 2.0
Standard 6 PIN SIM card
LED Indicators Power / Connection
Power Required 5V ±5%


R36A Specification (Indoor WiFi Router)
WiFi Standard IEEE 802.11n
IEEE 802.11g
IEEE 802.11b
Frequency 2.142GHz – 2.472GHz
Channel Width 20 / 40MHz
Data Rate 802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 300Mbps
Antenna 1x internal
1x external
LED Indicators Power, LAN, WAN, WLAN, USB
Power requirement 12V DC
Wireless LAN Security Key 64/128bit WEP
WPA Mixed
802.1x authentication
Operational Temperature -20°C ~ 40°C
Storage Humidity 10% ~ 90% (Non -condensing)
Dimensions 93 x 70 x 26
Weight 74g


Outdoor Antenna Specification
Model AOA-M4G
Frequency 600-960MHz
VSWR ≤2:1
Radiation Pattern Omni
Connector N-Type (Female)
Material Fibre Glass + Stainless Steel base


Indoor Antenna Specification
Model ARS -N05
Frequency 2.4GHz -2.5GHz
VSWR 2:1
Gain 5dBi
Radiation Pattern Omni
Connector RP SMA (Male)
Material Rubber
Length 171.5mm

Additional information

Weight 800.0000 g
Dimensions 34.0000 × 18.0000 × 8.0000 mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.